background image

© 2018 Precision Lighting Ltd.    We reserve the right to change details of design, materials and finish.    Version   07.19

instruction manual

Atto Jack & Minipoint System

Atto Jack is a small modular display 95 CRI 
LED luminaire offering 360º bearing aided 
rotation and 180º tilt that uses the Precision 
Lighting Minipoint system.
 
Atto Jack     

1.2W 

102lm

Atto S Jack    

1.2W 

102lm

Atto T Jack    

1.2W 

102lm

These instructions cover procedures for all 
versions of Atto Jack fixtures including: 

Atto Jack
Atto S Jack
Atto T  Jack

1.  Mains supply to driver must be OFF 

before connecting or disconnecting 
the fittings.

2.  All systems must be installed by 

a suitably qualified professional 
only. Installations must conform 
to national installation, accident 
prevention regulations.

3.  Do not install any fixture closer 

than 150mm (6 inches) from any 
combustible material. Do not install 
these systems in a damp or wet 
location.

4.  To reduce the risk of fire and burns, 

do not install these systems where 
exposed bare conductors can be 
shorted or contact any conductive 
materials. Do not conceal or extend 
exposed conductors through a 
building wall.

5.  Install only as described in 

this Precision Lighting manual. 
Appropriate fixings will need to be 
used depending on surface material 
at the installer’s discretion.  

6.  Ensure all connections are tight. Bad 

connections can cause overheating, 
arcing and potential fire risk. 

7.  Wire supply connections must be 

made with U.L or compatible testing 
agency-approved connectors.

8.  Luminaires may be hot, allow to 

cool before touching.

9.  Regular cleaning of these products is 

important. Switch off at mains supply 
and allow to cool before touching. 
Clean fittings with a microfibre cloth. 
Then reconnect the power supply.

10.  Always use appropriate optics and 

ensure they are fitted securely. 
Use only Precision Lighting 
recommended accessories. 

11.  These are constant current 

fixtures. For use only with an 
appropriate 350mA LED driver as 
recommended by Precision Lighting

33

KEY PRODUCT FEATURES

Atto Jack luminaire

Atto T Jack luminaire

Atto S Jack luminaire

Decorative Cover

E Minipoint

Lock Washer

G Nut

A

Atto Jack Luminaire Modules

B

C

D

E

F

G

Reviews: