© 2018 Precision Lighting Ltd. We reserve the right to change details of design, materials and finish. Version 07.19
1. Installation
WARNING
switch off power to mains
before installation.
Cut hole ø18mm (3/4 of an inch).
Feed mains cable through hole and insert
Minipoint into hole.
Note:
You will need
rear access
to
minipoint in order to secure it into place.
Put on lock washer and then screw on
M17 nut onto back of minipoint. Fasten
tightly to secure minipoint in place.
Screw on decorative cover with desired
finish on to top of minipoint.
1.
2. Inserting Atto Jack into Minipoint
WARNING
switch off power to mains
before installation.
WARNING
Do not hot plug!
Insert Atto jack luminaire into the
minipoint ensuring to line up pins with the
internal grooves.
Keep applying pressure until you hear
a soft click and the O ring is no longer
visible.
3. Locking Pan & Tilt
NOTE
Only adjust luminaire position
when unlocked.
Adjust luminaire to desired position. To
lock into place, insert 0.9mm hex key
provided into pan and tilt holes then
rotate hex key clockwise.
2.
ø18
M17 Fixing
M17 Fixing
CLICK!
CLICK!
WARNING
Do not hot plug!
3.
PAN
TILT
