UFO Quasar UFOQUA2790-A, User Manual

Page: 3 / 28

IMPORTANT
This product must be installed in accordance with the applicable installation code, by a person
familiar with the construction and operation of the product, and the hazards involved.
These illuminators are not mains dimmable.
The LED array in this illuminator is not replaceable. When it reaches end of life the whole unit
must be replaced.
Type Y Attachment: If the external flexible cable or cord of this luminaire or associated
PSU/driver is damaged, it shall be exclusively replaced by the manufacturer or his service agent
or a similar qualified person to avoid a hazard.
Location: Do not locate this illuminator closer than 200mm (8”) from any flammable surface.
Clearance / Ventilation: It is imperative that a gap of 200mm (8”) is left around the unit. This is
to allow air to circulate and prevent overheating. The location must have free ventilation and
must not have an ambient temperature higher than that specified for the luminaire.
Mounting: This luminaire comes with an integral mounting feet for securing the unit to a
vertical or horizontal surface.
Warning: Never look directly at the luminaire through the fiber port of the illuminator.
Warning: The luminaire should be positioned so that staring into the luminaire at a distance
closer than 2.7 meters (8.9 ft) in not expected.
INTRODUCTION
3
UFO LIGHTING