30
INSTALLATION, USE AND MAINTENANCE MANUAL
The magnetic sensor is made of two magnets that are installed on the fixtures and allow to
detect the opening of doors and windows. The alarm signal is given by the separation of the
two magnets. The sensor is powered by an internal battery, which can be replaced as follows:
Switch off the main device pressing the switch in the cylinder compartment;
Open the sensor by pressing on the plastic tab at the bottom;
Once the front cover has been removed, replace the battery by carefully sliding it aside;
Close the sensor by repositioning the front cover until it clicks into place;
Reposition the sensor and turn the device back on.
The Wi-Fi sensor is an infrared technology sensor which is installed indoors.
It is positioned on the wall and detects movements for an angle of 90 ° and for a distance of
almost 12 meters.
It is very easy to change the sensor’s battery:
Switch off the main device via the switch in the cylinder compartment;
Unscrew the base of the sensor and open it by pressing on the plastic tooth,
Once the front panel has been removed, replace the CR123A battery paying attention to the
two poles;
Close the sensor by positioning the front cover and tightening the screw.
Reposition the sensor and turn the device back on.
MAGNETIC SENSOR
WI-FI SENSOR
SENSORS
