37
INSTALLATION, USE AND MAINTENANCE MANUAL
NOTE
THE MANUFACTURER DOES NOT ASSUME ANY LIABILITY FOR DAMAGES TO
PEOPLE OR THINGS RESULTING FROM THE REUSE OF SINGLE PARTS OF THE
DEVICE FOR FUNCTIONS OR IN ASSEMBLY CONFIGURATIONS DIFFERENT FROM
THE ORIGINAL ONE.
THE MANUFACTURER REJECTS ANY ACKNOWLEDGMENT, IMPLIED OR EXPRESS,
OF FITNESS FOR A SPECIFIC PURPOSE OF PARTS OF THE DEVICE REUSED AFTER
DEACTIVATION FOR ITS DISPOSAL.
NOTE
THE MANUFACTURER IS NOT RESPONSIBLE IN ANY WAY FOR DAMAGES CAUSED
BY THE DEVICE IF NOT USED IN THE INTEGRAL VERSION AND FOR THE USES AND
METHODS OF USE SPECIFIED IN THIS MANUAL.
THE MANUFACTURER IS IN NO WAY RESPONSIBLE FOR ANY DAMAGE TO PERSONS
OR THINGS RESULTING FROM THE RECOVERY OF PARTS OF THE DEVICE USED
AFTER ITS DISPOSAL.
DISPOSAL
The possibility of reusing some parts of the device is subject to the total responsibility of the
user.
PUTTING OUT OF SERVICE
Deactivation of the device
The device is manufactured according to criteria of sturdiness, durability and flexibility that allow
it to be used for many years.
Once it has reached the end of its technical and operational life, it must be taken out of service
in conditions where it can no longer be used for the purposes for which it was designed and built
at the time, making possible the reuse of the raw material that make it up.
The same deactivation procedures must be observed in all the following cases:
Decommissioning of the device and storage in the warehouse;
Definitive disposal and subsequent disposal
