Thank you for purchasing this UFO light source.
To ensure that the light source is set up optimally and gives a long service life, please read this
user guide before installing, operating or performing any maintenance on the unit.
This light source is powered by a 24V Power Supply Unit or 24V constant voltage driver.
Please keep this user guide for future reference.
This light source is suitable for indoor use only unless it is situated in a weatherproof enclosure.
MODELS
COVERED
BY
THIS
USER
GUIDE
UFO Luna SLP-3000M / UFO Luna SLP-4000M
UFO Luna SLP-3000DMX / UFO Luna SLP-4000DMX
UFO Luna SLP-300010V / UFO Luna SLP-400010V
IMPORTANT
This product must be installed in accordance with the applicable installation code, by a person
familiar with the construction and operation of the product, and the hazards involved.
These light sources are not mains dimmable.
The LED array in this luminaire is not replaceable. When it reaches end of life the whole unit
must be replaced.
Type Y Attachment:
If the external flexible cable or cord of this luminaire or associated
PSU/driver is damaged, it shall be exclusively replaced by the manufacturer or his service agent
or a similar qualified person to avoid a hazard.
Location:
Do not locate this luminaire closer than 200mm from any flammable surface.
Clearance / Ventilation:
It is imperative that a gap of 200mm is left around the unit. This is to
allow air to circulate and prevent overheating. The location must have free ventilation and must
not have an ambient temperature higher than that specified for the light source.
Mounting:
This is a fixed luminaire. See mounting plate instruction on page 3 for
fixing to surface.
Warning:
Never look directly into the luminaire LED light source.
Warning:
The luminaire should be positioned so that prolonged staring into the
luminaire at a distance closer than 0.33m is not expected.
INTRODUCTION
LUNA
SLP
USER
GUIDE
2
Summary of Contents for LUNA SLP-3000M
Page 15: ...NOTES 15 UFO LIGHTING...
