The light source is powered from a 24V DC PSU/Constant Voltage SELV LED driver.
The driver caters for UK/European/other mains supplies using the relevant power cord
supplied.
POWER
SUPPLY
REQUIREMENTS
There are 2 connections required – the fibre port and the mains supply cable. The fibre port
should be connected first. Connect and secure the fibre optic connector into the collar and
secure using the M5 locking screw.
Connect the PSU to the DC input jack socket on the light source, and connect the IEC cable to
the PSU. Plug the mains plug into the electrical supply socket. Switch on power the led
indicator will illuminate and the light source is ready for use. If no light is produced consult the
TROUBLESHOOTING section of this user guide.
Note:
these light sources are not mains dimmable.
CONNECTION
-
LUNA
M
MODELS
ONLY
LUNA
SLP
-
XXXXM
CONNECTIONS
LUNA
SLP
-
XXXXDMX
/10
V
CONNECTIONS
INSTALLATION
LUNA
SLP
USER
GUIDE
4
Summary of Contents for LUNA SLP-300010V
Page 15: ...NOTES 15 UFO LIGHTING...
