TROUBLESHOOTING
Problem
Probable cause
Solution
The iron does not heat.
1. Temperature control in very low position.
2. No mains supply.
1. Turn to a higher position.
2. Check with another appliance or plug the iron
into a different socket.
Display light flashes and the
position
“OFF”
is selected.
Auto shut-off function enabled.
Move the iron about gently.
The clothes tend to stick.
Very high temperature.
Select a much lower temperature.
Water comes out together
with steam.
1. Temperature regulator in very low position.
2. Steam regulator in very high position with low
temperature.
1. Select the temperature corresponding to the
positions
“COTTON”
and
“LINEN”
.
2. Turn the steam regulator to a much lower
position
(“1”)
.
Steam does not come out.
1. Steam regulator in closed position.
2. Temperature regulator in very low position.
3. No water in the tank.
4. Obstructed mechanism.
1. Select the temperature corresponding to the steam
regulator positions
“COTTON”
and
“LINEN”
.
2. Turn the temperature regulator to a steam
position
(1, 2
or
3)
.
3. Fill the tank.
4. Remove the needle and clean it, if this does not
help, contact the Technical Service.
Spray does not work.
1. No water in the tank.
2. Obstructed mechanism.
1. Fill the tank.
2. Contact the Technical Service.
Water comes out from the
soleplate before connecting
the iron.
The steam regulator is not properly closed.
Make sure to place the steam regulator in position
“0”
. Do not forget to empty the tank when you
have finished ironing.
Smoke comes out when
connecting the iron for the
first time.
Lubrication of some of the inner parts.
Do not worry. It will disappear in a short period of
time, after the first usage.
This manual can be downloaded from the Ufesa website.
Summary of Contents for PV1555
Page 2: ...1 1 1 2 2 2 4 2 3 9 8 5 6 7 10 2 11 ...
Page 3: ...7 6 ...
