UFESA CE Sensazione, Instruction Manual

Page: 56 / 200

56
2. Touch the coffee strength adjustment icon (f) for 3-5 seconds.
A beep will be heard and indicators will light up showing preselected water hardness.
“Very hard” hardness is selected by default from factory.
3. Touch the icon (f) repeatedly for changing water hardness. Indicators will light up suc-
cessively with each touch. Once selected, this value will be saved automatically.
3.3 Customization of water quantity adjustment
The amount of water dispensed for each type of drink (espresso, lungo and hot water)
can be selected and memorized. There are 3 levels, the first two are fixed and the third is
customizable.
To memorize a quantity in the third position, proceed as follows:
1. Touch the Power icon (a) to switch the coffee maker on. Wait until all the indicators
light up permanently.
2. Touch the icon corresponding to the drink you want to prepare for 5 seconds.
3. A long beep will be heard. The indicator light for the maximum quantity of water per
cup (g) will light up.
4. Adjust the desired coffee intensity by repeatedly pressing the icon (f) (see section 4.1.5
selecting the coffee strength) and confirm by pressing on the icon of the selected drink (b,
c, d or e). The coffee maker will start dispensing the selected drink, until you touch the icon
of the selected drink (b, c, d or e) again.
At that time the drink will no longer be dispensed and the quantity dispensed will be me-
morized in the maximum position of water quantity.
NOTE: The customizable quantity for each type of drink is:
- Espresso / Steam: From 1 to 230ml
- Lungo / Hot Water: From 1 to 430ml
NOTE: The factory values in the maximum water position are: Espresso: 70 ml
Lungo: 200 ml
Hot Water: 360 ml Steam: 46 ml
Very hard
(more than 22 °dH)
Hard
(15-21 °dH)
Medium
(7-14 °dH)
Soft
(up to 7 °dH)