UFESA CE Sensazione, Instruction Manual

Page: 53 / 200

53
NOTES:
- Adjust the grind setting only while the grinder is working, otherwise it might be damaged.
- The new setting will not be noticed until after the second cup of coffee.
- Do not insert fingers or foreign objects into the grinding unit!
- Place the selector in the finest position if you want to get the most out of your coffee.
1.6. Water filter
The water filter (16) is supplied as an accessory (model dependent). It may be purchased from
our after-sales service or specialist shops (see section “Accessories”).
The filter is recommended for:
Protection against scaling, reduction of heavy metals (copper, lead), reduction of harmful or-
ganic substances (pesticides, herbicides), reduction of odors and flavors (chlorine) and optimi-
zation of the taste of coffee and cream.
To assemble the filter, proceed as follows:
1. Rinse the new filter in a water container.
2. Firmly insert the filter into the water tank connection in an upright position.
Very important: make sure that the rubber gasket is correctly inserted in the coupling on the
bottom of the water tank.
3. It is recommended to replace the filter every 2 months.
Replacement should be carried out preferably just after having carried out a descaling pro-
cess. Turn the date indicator at the top of the filter by selecting the current month to remember
which month the filter change was made.
4. Then, dispense a cup of hot water to rinse water circuit.
5. Program the coffee maker to indicate that the filter is mounted.
By default, the water filter is deactivated at the factory, to activate it follow these steps:
1. If the coffee maker is switched on, touch the power icon (a) to switch it off. All the indicators
will go off.
2. Tap the cleaning icon (h) for 3-5 seconds and the icon will light up making 1 short beep. Press
the icon again:
a) A long audible signal and the indicator flashing 2 seconds means that the filter is installed.
b) If only a 2-second flash occurs without an audible signal, the filter is not installed.
3. Touch the cleaning icon (h) to switch from on to off mode and vice versa.