UFESA AE4822 sena, Instruction Manual

Page: 23 / 76

BEFORE FIRST USE
1. Put the unit to the wall mount
2. Ensure that the air vent, suction pipe are free from blockages and dust. Should
they suddenly clogged, switch off the appliance immediately and clear the
blockage before attempting to use the vacuum again.
3. Remove any sharp or large objects from the path before using
this vacuum as these may damage the appliance irreparably.
NOTE: In the event of a maintenance issue with the product such as a jammed
brush roller, all three BLUE indicator lights will flash on around 10 seconds then
off until the issue is resolved, in this case turn the cleaner off until the issue is
rectified.
Battery Charging
1. Push the release button and take the battery module out.
Plug the cable into the power inlet located on the side of the battery. When
charging, the energy indicator light will be illuminated RED. Once fully charged
this indicator light will keep bright in Blue. Once fully charged, turn off the charger
plug from the power socket.
2. You can also charge the battery through the main body. The three indicator lights will indicate one by
one to show the battery capacity be charged. When the battery is fully charged, all three lights will keep
bright in blue.
23