Instructions for Use
44
0°
90°
Fig. 18
Cooling
When set to position , the appliance
cools and dehumidifies the air in the room
at the same time in order to create a
pleasant atmosphere.
•
Plug the appliance into the mains
electricity supply.
•
Lead the hot air expulsion tube outside.
In order to avoid excessive noise and
efficiency loss, the air expulsion tube
should be positioned as shown in,
Fig. 13
. See "Temporary installation".
•
Check that the plug,
Fig. 1
, is fitted on
the drainage pipe to prevent water from
leaking onto the support surface.
•
Lift the air director on the top of the
appliance. This air director is not i n s t a l l e d
on the appliance on
AA5720
models. See
f i g u res
2 6
and
2 7
in "H e a t i n g".
•
Select the silent , high or
turbo cooling function,
Fig. 19.
Fig. 19
•
Set the thermostat to the desired
temperature,
Fig. 9
. If the appliance
turns itself off automatically because the
temperature set for the room has been
reached and it is necessary to wait for
ambient temperature to rise 2-3°C
before it comes back on again.
During air conditioning, some of the
condensed water produced evaporates
automatically and is expelled outdoors
together with the expelled air through the
hot air expulsion tube.
In conditions of extreme humidity, the
appliance accumulates condensed water
in an internal tank. When a certain level is
reached an indicator light,
Fig. 3
, comes
on indicating that the condensed water
tank is full and needs to be emptied.
When this happens, the appliance stops
cooling the air in the room until the water
is drained, as explained in "Transportation
requirements",
Fig. 7
.
•
It is recommended that you turn the
appliance off while draining the water.
Warning!
Remember that when the appliance is
turned off, it is necessary to wait for
approximately 3 minutes before turning
it back on again. This period of time is
required in order to ensure correct
appliance operation.
Fig. 20
Dehumidification
In this operation function, the appliance
reduces the humidity in the atmosphere
and purifies the air.
•
Set the thermostat to its minimum
temperature setting,
Fig. 21
.
