UES perfectMelt, Manual

Page: 46 / 61

UES AG · Breuershofstr. 48 · 47807 Krefeld · Germany
Tel.: 0049-2151-72950 · Fax: 0049-2151-729578 · info@ues-ag.net · www.ues-ag.net
46
Pin assignment (main board)
Connector M1
PIN DESCRIPTION
1 Power supply Pwr (19Vac 1,5A) for Opto
2 Power supply Pwr (19Vac 1,5A) for Opto
3 Power supply Pwr (19Vac 0,5A) for Micro
4 Power supply Pwr (19Vac 0,5A) for Micro
Connector M2
PIN DESCRIPTION
5 An.In.1 PT100 1 Tank input
6 An.In.1 PT100 1
7 An.In.2 PT100 2 Manifold input
8 An.In.2 PT100 2
Connector M3
PIN DESCRIPTION
9 An.In.1 Power supply 24Vdc
– Pressure sensor 0-10Vdc
10 An.In.1 Signal 1 - Pressure sensor 0-10Vdc
11 An.In.2 Signal 2 - Pressure sensor 0-10Vdc - OPTIONAL
12 An.In.2 Power supply 0Vdc - Pressure sensor 0-10Vdc
Connector M4
PIN DESCRIPTION
13 Digital OUT Relay 5 - OPTIONAL
14 Digital OUT Relay 5 - OPTIONAL
15 Digital OUT Relay 4
– Alarm for external devices
16 Digital OUT Relay 4
– Alarm for external devices
17 Digital OUT Relay 3
– Cut-out temperature
18 Digital OUT Relay 3
– Cut-out temperature
19 Digital OUT Relay 2
– Ready signal for external devices
20 Digital OUT Relay 2
– Ready signal for external devices
21 Digital OUT Relay 1 - Filler
22 Digital OUT Relay 1 - Filler
Connector M5
PIN DESCRIPTION
23 RS485-opto OPGND
24 RS485-opt - RS485-2 For inverter device
25 RS485-opto + RS485-2 For inverter device
Connector M6
PIN DESCRIPTION
26 Digital OUT Pump 1 (OUT OP24Vdc)
27 Digital OUT OPGND
28 Digital OUT Pump 2 (OUT OP24Vdc)