21
7.
Place battery into the holding tabs in the back half of the case.
8.
Replace the back cover and
install screws, while taking care
not to crush internal cabling.
Reinstall boot if desired.
If the unit will not be used for several months, remove batteries from
the unit.
Do not heat or open battery. A battery not designed to be recharged
can leak or rupture if recharged.
Where facilities exist, alkaline batteries can be recycled.
Cleaning
Do not use harsh acids or bases to clean the unit. To clean the unit,
wipe with a damp cloth and a warm solution of soap and water. Do
not immerse the unit under water.
Maintenance
Check the connections between the pressure port and your service
manifold periodically. As the unit is exposed to heat and cold, the
connections may loosen. Retighten if necessary.
If the pressure port is loose against the case of the analyzer, use a
wrench to tighten the speed nut up against the unit. Do not use
excessive force.
There are no user serviceable parts inside the unit. Do not
disassemble the case.
