Temp/Prs Screen
Default Selections Are:
T1 (displayed in For C)
T2
(displayed in For C)
llT (displayed in For C)
P (displayed in unit selected; mBar, lnH20, hPa, mmHg, PSI, kPa, Pa, mmH20) (C163 & C164 only)
Exch Test Screen
Default Selections Are:
02 (displayed in%)
con
(displayed in p)
CO2
(displayed in %)
NOn
(displayed in p)
NOxn
(displayed in p)
NAT GAS
Ti 77.2F
AT�1 1012m
CAL 353
09:42 ►
ii
I
User Interface
STATUS SCREEN
Select "Status" on the dial to view the following:
Current fuel selection. Use status bar to change fuel selection.
Select between: Pellets, Light Oil, Heavy Oil, LPG, Butane, Propane, Natural Gas, Bio Oil
Ambient temperature around the analyzer.
Current atmospheric pressure (mBar).
Shows number of days until next calibration is due.
The large six-line display will indicate 5 lines and the status bar (see pg. 10) the backlight will activate on each button press and turn oft
after 10 seconds of no activity. Navigation through the various start options and menu system is via the 3 button dedicated Up, Down &
Enter Buttons. Button presses are categorized short press and long press
Status Bar
The Status Bar provides the user with a concise indication of the instrument status, it incorporates an intelligent system that
understands what the user is currently viewing on the display ottering appropriate menu items as well as standard menu items.
Navigation through the Status Bar options is achieved via the • and ...,. buttons when the Status Bar is visible on the display.
9
