16
ROOM CO TESTING CONT.
ROOM CO display
CO readings are recorded every 2 minutes for up to 30 minutes .
Test 00 = initial CO test in series .
Test
Interval
Time
Real time CO reading (ppm) .
The user can stop the Room CO test at any time by pressing
.
If not stopped earlier, the Room CO test will automatically end after the designated time .
The CO test series is automatically stored in the memory as a log number .
When completed the log can be printed immediately by pressing
.
VIEWING/PRINTING A LOGGED ROOM CO TEST
Select “MENU” / “REPORT” / “ROOM CO” / “VIEW”
When LEDs are not flashing
Use the
◀
/
◀
keys to change line .
Press
to cause the LEDs on that line to flash .
With the LEDs flashing, press
◀
/
◀
to allow the parameter on that line to be changed .
Press
to select that change .
The LEDs stop flashing and
◀
/
◀
Use
◀
/
◀
to change the line again .
TEST TYPE
With no LEDs flashing
Use the
◀
/
◀
keys to move the lit LEDs to the line you want .
You can change the LOG number and the TEST number so that you can view individual test results .
Press
to select the line you want, and the LEDs will start to flash .
Now use the
◀
/
◀
keys to change the number (the TEST number or the LOG number) .
Press
when you are happy with the changes . The LEDs will stop flashing . Now use the
◀
/
◀
keys to move the LEDs to the PRINT line .
Sending to the printer or wireless device will only occur when you move the LEDs to the print line and press
.
Press
to print the test, (or send to PC via optional Wireless module) .
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
