DSD 700
OPERATING INSTRUCTIONS
13
Bouquet Selection
The TV services are transmitted in subscribed packages called
BOUQUETS, each bouquet containing a series of services. The DSD
has provision for several bouquets, any of which can be selected
by pressing TV on the RCU, highlighting the required bouquet using
the up/down arrows on the RCU, then following the on-screen
instructions. If a selected bouquet is not subscribed to, a message
“E38 Service is not currently running” will appear on the TV screen.
When a subscribed to bouquet is selected, the services in that
bouquet will be listed numerically in the Electronic Programme
Guide.
Selecting Specific Services
Specific TV or Audio Services can be selected, either:
♦
Directly
♦
By stepping through services
♦
By using the Open TV Electronic Programme Guide (EPG), or
♦
By using the Open TV Information Bar.
Selecting Services Directly
Services can only be selected directly using the RCU. To select a
specific service, do the following:
1
To select an audio service, press
on the RCU. Press
TV
to restore TV services.
NOTE: By pressing or TV a mini-menu will appear on
screen. Using the or buttons, select the bouquet
that you wish to view and press OK to confirm
selection. Select other applications if available.
2
Press the number of the required service on the RCU’s
numerical keypad.
The specific service will be heard/displayed after a few
moments accompanied by an information box at the bottom of
the TV screen with details of the selected service.
NOTE:
To select services requiring two/three-digit
numbers, i.e. 10-999, it is necessary to press the
second-third digit without pausing after pressing
the first/second digit.
TIP
:
When the key for the first digit is pressed on the RCU, the
corresponding number is displayed on the left of the front
panel numerical display on the DSD. After a few moments,
the number moves to the right. The second digit of two digit
numbers must be keyed in before this move takes place.
Stepping through Services
Stepping through services is possible using either the RCU or DSD
front panel keys.
Selecting Specific Services from the EPG
NOTE:
For a description of the
Electronic Programme
Guide (EPG) refer to the next section.
Stepping using the RCU
To step through services using the RCU, do the following:
1
Refer to step 1 of “Selecting Services Directly”.
2
Press P+ to step to the next service or P - to step to the
previous service in the list of available services.
After pressing P+ or P -, an information box is displayed at the
bottom of the TV screen with details of the service. After a few
seconds, the relevant service is displayed/heard.
3
If required, continue stepping by pressing P+ or P - until you
find the service you prefer. It is not necessary to wait for
services to be displayed/heard before stepping to the next or
previous service.
If you decide to watch or listen to a service you have stepped
to, wait for the service to be displayed/heard. The information
box will disappear after a short while or can be removed
immediately by pressing EXIT.
NOTE:
When you reach the last available service in the list
and press P+ you are returned to the first service
in the list.
TIP
: Use the convenient selecting and sorting facilities to
personalise the services list. After using these facilities, your
favourite services will be in your order of preference.
Stepping using the Decoder Front Panel Keys
To step and select a specific service using the decoder front panel
keys, do the following:
1
Select the type of service required, by pressing TV/ to
switch between TV services and audio services. Selection of
the audio service is indicated by a green indicator on the front
panel display.
NOTE:
By pressing TV a mini- menu will appear on
screen. Using the or buttons, select the bouquet
that you wish to view then press OK to confirm the
selection. Select other applications if available.
2
Press (up) to step to the next service or (down) to
step to the previous service in the list of available services.
After pressing or , an information box is displayed at
the bottom of the TV screen with details of the service. After
a few seconds the relevant service is displayed/heard.
3
Continue stepping, by pressing or until you find the
service you prefer. It is not necessary to wait for services to
be displayed/heard before stepping to the next or previous
service.
To view/listen to any service you have stepped to, wait for
the service to be displayed/heard. The information box will
disappear after a short while.
NOTE:
When you reach the last service in the list,
pressing returns you to the first service in the
list. The
or
symbols have dual functions and
cannot be used for stepping while the volume
control box is played on the screen. This box is
displayed when setting the volume.
