29
Installation Settings
Dish Alignment Help
While in the
SATELLITE CHANNEL SEARCH
press the
HELP
button on your RCU to
open the
DISH INSTALLATION MAP
.
This function presents you with a map of Australia. Use the
NAV
buttons to move the cursor
to your current location, then press the
OK
button. The STB will calculate the required
Satellite Dish alignment, and provide the angles required to align the dish for your location.
The Bearing in degrees is
calculated in relation to
‘True North’. If you use
a magnetic compass,
you may need to correct
‘Magnetic Declination’.
See http://www.ga.gov.au/
webtemp/image_cache/
GA17167.gif
Dish Installation
To
connect a satellite dish
, enter the
INSTALLATION
menu, and
select
DISH
INSTALLATION
. First, select your switch
mode, either
DiSEqC 1.0
or
DiSEqC 1.2
by
using the
left
and
right
NAV
buttons. To
select the
satellite options,
press
down
on the
NAV
buttons, and then press the
OK
button while the
satellite
is highlighted.
The advanced satellite settings will now be shown where you can select the
satellite
,
LNB
Type
, and
DiSEqC port
. While DiSEqC is highlighted, press the
Green
(2
nd
of left) button to
access
ADVANCED DiSEqC OPTIONS
.
!
Summary of Contents for DSD 5000
Page 1: ...DSD 5000 USER MANUAL...
