Uebo S400 User Manual Download Page 52

Page: 52 / 155

UEBO S400 User Manual

2-43



Click

The default settings are restored. In addition, you can press the

Reset

button behind the UEBO S400 to set the restoration of the default settings.

Caution:

After the default settings are restored, the system IP address, all services such as
iSCSI and NAS, time zone, Web ports, and data and time setting are restored to
the default settings.

Be cautious when restoring the default settings.

System Upgrade



Choose

Advance Options

System Upgrade

. The

System Upgrade

interface is

displayed. On this interface,

you can upgrade the system to a new version.



Click

Browse

to select the upgrade package.



Click

Update

to and ensure that the upgrade package is correct.



Click

. The upgrade finishes.

Summary of Contents for S400




























































































































































Search results

Summary of Contents for S400

Reviews:

Related manuals for S400

Brands by name

Popular brands

Uebo S400, User Manual

Search results

Summary of Contents for S400

Reviews:

Related manuals for S400

Brands by name

Popular brands