- 14 -
4. Align the bicycle rack (1) parallel to the bumper and move the
clamping lever (10) down so that the safety lever (16) engages.
5. Lock the clamping lever (10) with the key (5). Pull out the
key (5).
6. Jiggle the bicycle rack (1) to ensure it is sitting firmly.
Remove the bicycle rack (1) if necessary and reattach.
7. Remove the plug for the lighting system (11) from the bracket,
insert in the socket (19) and turn clockwise as far as it will go.
8. Check that the lighting system functions correctly.
Removing the bicycle rack
Remove the bicycle rack (1) from the vehicle in reverse order.
Mounting/removing bicycles
16
10
5
1
M+P-25A-0115
1
11
19
M+P-25A-0116
Attention
The bicycle rack for the trailer hitch is only intended for
transporting bicycles.
Only bicycles, each with a max. weight of 30 kg, may be
transported on the bicycle rack.
The maximum allowable load capacity of the bicycle rack,
the tow bar load of the trailer hitch, the allowable total
vehicle weight and the maximum allowable vehicle axle
load (see vehicle owner’s manual) must not be exceeded.
If these instructions are not followed, the bicycle rack together
with the mounted bicycles may free themselves from the
vehicle and cause injury to you and other persons, and/or may
result in an accident.
Attention
The bicycles must be mounted evenly and with a low centre
of gravity on the bicycle rack. Each must be secured against
falling off using a bracket on the bicycle frame and lashing
straps on front and rear wheels.
If this is not adhered to, bicycles and/or the loose parts could
free themselves from the vehicle and lead to an accident and
associated injury and property damage other road users.
Before mounting, remove child seats and all loose parts,
such a s water bottles, saddlebags, batteries from E bikes etc.,
from the bicycles and stow them.
Attention
A risk of injury exists if bicycles slip or tilt. Secure the bicycles
against slipping off/tilting.
Mount and dismount the bicycles together with another person.
Attention
On some types of vehicle, the rack and the bicycles may be
positioned too close to the vehicle’s exhaust system. The hot
exhaust pipe and fumes can damage the rack and/or the
bicycles. In this case, the bicycle rack is not suitable for use.
For bicycles with carbon parts, consult the manufacturer/dealer
to find out whether they are suitable for transport on the bicycle
rack.
