ó ç ó
Folding out / collapsing the bicycle rack
Folding out the bicycle rack
1. Open the quick release clamp (5).
2. Fold up the rack frame (6) and close the quick release
clamp (5). If necessary, turn the quick release clamp (5)
clockwise if the rack frame (6) is too loose.
3. Fold out the wheel rails (7) and engage.
4. Fold out the tail lamps (8) and engage.
5. Unlock the brackets (9 and 10) with the key (4).
6. Swing the brackets (9 and 10) forward and slide along the track
frame (6) into the required position.
7. Press the bracket (14) down. Insert the number plate in the
number plate holder (11), press up against the stoppers (15)
and insert fully. Release the bracket (14) and check that it is
positioned securely.
Ò±¬»
If the quick release clamps (5) cannot be closed, turn
anticlockwise.
Ò±¬»
The registration number on the bicycle rack must match the
registration number of the vehicle and be clearly legible.
Ò±¬»
To insert higher number plates, press the stoppers (15) back
and slide the plate fully into the number plate holder (11).
For narrow number plates, use the drilling points (16) for
attaching the plate.
