Version 1
8
4.
Setup menu (Function Bar Screen):
There are 18 Setup menus. To enter and use any
of the Setup menus:
a. click the Sensitivity dial until the cursor blinks on the Function Bar
b. If Setup menu is not shown, spin the Sensitivity dial until Setup menu appears. Push
and hold the Sensitivity dial until the first screen appears. To move to a specific setup
item, spin the Sensitivity dial to the setup menu number (1-18). Push and hold to
enter and use.
Setup Menu Screens:
1.
Add/Remove SD card:
a. Be sure to insert the SD card
before
turning the Ultraprobe on.
b. The Group data will be read by the Ultraprobe on power up.
c. On power down (off), all data and WAV files are stored on the SD card.
d. The Add/Remove SD Card function allows users to change the card while the
unit is on.
e. While the power is on, a warning will advise against removal (unless Menu 01
is selected).
**There is a risk of losing data if the SD card is removed without activating Menu 01.
The SD card must be inserted into the Grease Caddy in order to review and store data**
2. Store Before/After:
When selected, this function allows the user to store decibel readings before
adding lubricant and after adding lubricant.
To set this function:
A, Enter set up mode and go to Menu 2.
B. Click the sensitivity dial to select and spin it to "on".
C. Then click the sensitivity dial to set .
D. To exit press and hold the sensitivity dial.
