Version 1
6
V. Display Panel Screens and Functions
1
.
Moving around the screens using the Sensitivity/Spin & Click dial:
a. To move around a screen or to enter and use a feature of the
“Function Bar”
(described below) there are two ways to use the Sensitivity/Spin and Click dial.
The first is to lightly click to move the blinking indicator/cursor to a feature on the
display screen. For example, if you want to adjust the sensitivity, click the Sensitivity
dial until the S= blinks. Spin the Sensitivity dial clockwise (UP) or counterclockwise
(DOWN) to adjust the sensitivity.
The second method is to push and firmly hold the Sensitivity/Spin & Click dial. This is
used to store a reading or enter any of the Function Bar features.
1.
FUNCTION BAR:
The
“Function Bar” is located on the bottom of each Display screen
(Display Screen 1 and Display Screen 2).
There are 4 selections: SD INFO,
Display 1, Display 2, Setup Menu, STORE record. To enter and use any of these
Functions:
a. Click the Sensitivity dial until the Function Bar blinks.
b. Locate the desired Function menu by spinning the Sensitivity Dial
c. Push and briefly hold the Sensitivity Dial to select and ent er the Function.
2.
Changing Display Screens:
To change from one display screen to another:
a. Click the Sensitivity dial until the Function Bar blinks
b. If the Display screen is not shown, spin the Sensitivity dial until it is visible
c. Push and hold the Sensitivity Dial while noting the screen change
3.
Storing a Record:
The STORE Record prompt is located on the Function bar of both
Display 1 and Display 2.
a. If STORE Record is not shown, click the Sensitivity dial until the cursor blinks on
the Function Bar and spin the Sensitivity dial until STORE Record is displayed.
b. To store a record, push and briefly hold the Sensitivity dial. The screen will display
“Store record confirmed” and move to the next storage location
There are four screens: 2 Display Screens and 2
“Function Bar” Screens
FUNCTION BAR
