9
SETUP MENU SCREENS
MENU 01 ADD/REMOVE SD CARD
Be sure to insert the SD card before turning the Ultraprobe on.
The Group data will be read by the Ultraprobe on power up.
On power down (off), all data and WAV files are stored on the SD card.
The Add/Remove SD Card function allows users to change the card while the unit is on.
While the power is on, a warning will advise against
removal (unless Menu 01 is selected).
NOTE:
There is a risk of losing data if the SD card is removed
without activating Menu 01. The SD card must be inserted into
the Grease Caddy to review and store data.
MENU 02 STORE BEFORE/AFTER.
When selected, this function allows the user to store
decibel readings before adding lubricant and after adding lubricant.
To set this function:
Enter set up mode and go to Menu 02.
Click the Sensitivity dial to select and spin it to "ON”
.
Then click the Sensitivity dial to set.
To exit press and hold the sensitivity dial.
