![background image](http://html.mh-extra.com/html/udp-technology/ipn1202hd/ipn1202hd_installation-manual_834308020.webp)
IPN Series
IPN1202HD-5241 Installation Guide
01A.03
UDP Technology Ltd.
20
APPENDIX (B): POWER OVER ETHERNET
The Power over Ethernet (PoE) is designed to extract power from a conventional twisted pair
Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard.
The IEEE 802.3af-2003 standard allows up to 15.4 W power to device. However, 12.95W is the
maximum available power, as some power gets lost in the cable.
PoE has advantages over conventional power in such places where AC powers cannot be
reached or expensive to wire.
The device’s power consumption is 5.28 W or 5.40W when the fan is on.
Note: For proper activation of 12V PoE, the Category 5 cable must be shorter than 140m and
conform the PoE standard.
PoE compatibility
With non Power Sourcing Equipment (PSE)
When it is connected with non-PSE, the power adaptor should be used.
With power adaptor
Connecting both PSE and power adaptor do not cause any harms to the products.
Disconnecting power adaptor while it is operating does not stop operation. The product
continues to work without rebooting.
Power classification
The PoE Power Class supported by the IP device is Class 0.
Class
Usage
Minimum Power Levels
Output at the PSE
Maximum Power Levels at the
Powered Device
0
Default
15.4W
0.44 to 12.95W