On Screen Menu Operation Manual
C
UDP Co., Ltd.
24
2.10.5. SCREEN SET UP
BRIGHTNESS
: 0~15
SHARPNESS
: 0~15
BACK LIGHT
: ON/OFF/AUTO
BMB LEVEL
: 1~7 /89*
BMB(Black Mask BLC)MODE
: ON/OFF
BMB is different to backlight compensation. BMB masks the excessive light so that objects
look clearly.
To adjust camera Value or Back Light On/Off/Auto, twist the joystick clockwise or
counterclockwise.
2.10.6. DIGITAL EFFECT
DIGITAL ZOOM
Off : Zoom range is limited to the optical range
On : 2X/3X/…/9X/10X
The factory default value is 4X.
FLICKERLESS
: On/Off
If the screen appears to pulsate, flicker and/or even roll, you may use Flickerless control. The
main purpose of Flickerless control is to overcome this effect which is the harmonic power
frequency difference between the cycle of 50Hz fluorescent lighting and the vertical
synchronization of the camera which causes the “Flicker” on a monitor. The 50Hz power cycle
of a fluorescent light causes a “pulsating” image which is overcome by the Flickerless control
On.
CYBERSCAN PRE PACK
HOME
SYSINFO
DISPLAY
Z
FOCUS
DOME SETUP
Z
WB CONTROL
ALARMS AE CONTROL
CAMERA
Z
LINE LOCK
CONFIG
Z
SCREEN SET UP
LANGUAGE
Z
DIGITAL EFFECT
EXIT DAY & NIGHT
◄◄
SCREEN SETUP
►►
--------------------------------------------------
BRIGHTNESS : 08
SHARPNESS : 08
BACKLIGHT : AUTO
BMB MODE : OFF
BMB LEVEL : 7
--------------------------------------------------
SAVE EXIT
Press
ENT
or Push the
joystick to the right
CYBERSCAN PRE PACK
HOME
SYSINFO
DISPLAY
Z
FOCUS
DOME SETUP
Z
WB CONTROL
ALARMS AE CONTROL
CAMERA
Z
LINE LOCK
CONFIG
Z
SCREEN SET UP
LANGUAGE
Z
DIGITAL EFFECT
EXIT DAY & NIGHT
◄◄
DIGITAL EFFECT SETUP
►►
--------------------------------------------------
DIGITAL ZOOM : 4X
FLICKERLESS : 0FF
--------------------------------------------------
SAVE EXIT
Press
ENT
or Push the
joystick to the right
