On Screen Menu Operation Manual
C
UDP Co., Ltd.
13
2.7.4. VIEW ANGLE
When the dome camera is installed near wall, panning range could be programmed by user.
①
Flip
Allow the dome camera to automatically turn 180 degrees when the camera tilts to its lower
position. When camera reaches floor alone moving object, it will stop. Just hold the joystick
handle (up or down direction) down to run the flip function. When Flip function is turned on,
“F” flag is displayed at the bottom line.
②
PAN Limit(ON/OFF) : OFF
When the dome camera is installed near the wall, PAN LIMIT could be programmed by user.
* In case of FLIP Off, PAN LIMIT is available.
③
MIRROR/REVERSE
OFF : Normal image
H - MIRROR : Left-right reversal of the image
V - MIRROR : Upside down image
REVERSE : Left-right reversal and Upside down
2.7.5. POSITION
If the Cyber Scan OSD is overwritten on the other equipment like DVR, you can move the OSD
horizontally and/or vertically.
①
To move the OSD horizontally, twist the joystick clockwise or counterclockwise or click
TELE
or
WIDE
.
②
To move the OSD vertically, twist the joystick clockwise or counterclockwise or click
TELE
or
WIDE
..
◄◄
VIEW ANGLE SETUP
►►
-----------------------------------------------
FLIP [ON/OFF] : ON
OVERTILT[ON/OFF] :
PAN LIMIT[ON/OFF] :
PAN RIGHT LIMIT :
PAN LEFT LIMIT :
MIRROR/REVERSE : OFF
-----------------------------------------------
SAVE EXIT
CYBER SCAN DOME
HOME
SYSINFO AREA TITLE
DISPLAY
X
PRIVACY ZONE
DOME SETUP
Z
OSD DISPLAY
ALARMS
VIEW ANGLE
CAMERA
Z
POSITION
CONFIG
LANGUAGE
EXIT
Press
ENT
or Push the
joystick to the
right
◄◄
OSD POSITION SETUP
►►
-----------------------------------------------
HORIZONTAL POSITION : 27
VERTICAL POSITION : 04
-----------------------------------------------
SAVE EXIT
CYBER SCAN DOME
HOME
SYSINFO AREA TITLE
DISPLAY
X
PRIVACY ZONE
DOME SETUP
Z
OSD DISPLAY
ALARMS VIEW ANGLE
CAMERA
Z
POSITION
CONFIG
LANGUAGE
EXIT
Press
ENT
or Push the
joystick to the right
