![background image](http://html.mh-extra.com/html/udp-technology/ipc4100/ipc4100_operation-manual_834309026.webp)
On Screen Menu Operation Manual
C
UDP Co., Ltd.
26
INIT. ALL
Erase all stored data from the Flash-Rom of the selected dome camera (FACTORY DEFAULT).
You will be asked to enter Yes or No. If you intend to erase all data then press the
ENT
or
HOME
, otherwise press
CLR/ESC
to exit without erasing. The erased data includes all stored
data (Titles, Presets, and Tours).
2.11.2. DOME RESET
The main power of the camera will be turned off and then ON again.
2.11.3. GENERAL
2008.
GLOBAL FUNCTION : ON/OFF (Factory Mode : OFF)
This feature is used to enable or disable the GLOBAL Key function.
For detail information, refer to Page 29.
②
PAN OFFSET : Pan offset angle. In the screen (original pan angle + offset angle) is
displayed.
③
PRESET SPD(DEG/SEC) : Maximum master preset speed.
360/430/500 degree/sec selectable.
④
ARPC : ON/OFF (Factory Mode : ON)
of positioning com
Automatic recognition
pensation. The dome recognize pan/tilt angle
INITIALIZATION DATA…
Press
ENT
CYBERSCAN PRE PACK
HOME
SYSINFO
DISPLAY
Z
DOME SETUP
Z
ALARMS
CAMERA
Z
INITDATA
CONFIG
Z
DOME RESET
LANGUAGE
Z
GENERAL
EXIT
RESET:[HOME][ENT][F.NEAR]KEY
EXIT :[CLR/ESC][F.FAR]KEY
Press
ENT
or Push the
joystick to the right
---- CYBER SCAN DOME ----
HOME
SYSINFO
DISPLAY
Z
DOME SETUP
Z
ALARMS
CAMERA
Z
INITDATA
CONFIG
Z
DOME RESET
LANGUAGE
Z
GENERAL
EXIT
◄◄
GENERAL CONFIG SETUP
►►
--------------------------------------------------
GLOBAL FUNCTION : OFF
PAN OFFSET : 000.00
PRESET SPD(DEG/SEC) : 360
ARPC : ON
UNIVERSAL D.TIME : OFF
--------------------------------------------------
SAVE EXIT
Press
ENT
or Push the
joystick to the right
All manuals and user guides at all-guides.com
all-guides.com