![background image](http://html.mh-extra.com/html/udp-technology/ipc4100/ipc4100_operation-manual_834309021.webp)
On Screen Menu Operation Manual
C
UDP Co., Ltd.
21
2.9. ALARM
Note : If you want to go previous menu, please press
CLR/ESC
. To exit main menu without
saving, please press
MENU/LOCK
. To exit after saving, please press
ENT
. (Cyber Scan
protocol only)
Note : If there is no memorized Preset, Auto Scan, Tour or Pattern, you can not set up this
function.
④
In : OFF(No activation)
NC(Normally Closed, Active Open)
NO(Normally Open, Active Closed)
⑤
Out : 1~4 (Relay Out 1, 2, 3, 4), Off(No Output)
⑥
Time : Alarm will be held for programmed time(02 to 99 seconds)
Caution : This PTZ will not be operated during the period of Alarm On(Dwell Time).
After alarm off, you can control the PTZ as usual.
Note : When the Alarm is activated, you can see A.TIME on the top of the right screen.
◄◄
ALARM SETUP
►►
NO. PRI MODE IN OUT TIME
01 1 === OFF OFF 05
02 1 === OFF OFF 05
03 1 === OFF OFF 05
04 1 === OFF OFF 05
05 1 === OFF OFF 05
06 1 === OFF OFF 05
07 1 === OFF OFF 05
08 1 === OFF OFF 05
SAVE EXIT
◄◄
ALARM SETUP
►►
NO. PRI MODE IN OUT TIME
01 1 PT2 OFF OFF 05
02 1 === OFF OFF 05
03 1 === OFF OFF 05
04 1 === OFF OFF 05
05 1 === OFF OFF 05
06 1 === OFF OFF 05
07 1 === OFF OFF 05
08 1 === OFF OFF 05
SAVE EXIT
②
PRI(Priority)
③
Mode
Stored Preset, Tour, Auto Scan and Pattern
could be called
Twist the joystick
clockwise/counter
clockwise
Press PTRN and
twist the joystick
clockwise/counter
clockwise
All manuals and user guides at all-guides.com
all-guides.com