Compass calibration
Rotate the drone horizontally until the transmitter sounds "di... "Level correction to complete.
When the front navigation light turns to long light and the rear navigation light flashes,
enter vertical correction.Rotate the drone vertically until the transmitter sounds "di... "A
sound, vertical correction over. The lights are spinning and flashing.
Horizontal rotation
Vertical rotation
Tips: It’s a must to have the right compass adjustment first each time you start
the drone, or it can’t work normally
Gyroscope Calibration
After the calibration of the compass, the right stick
of the transmitter is pushed to the lower right corner
by 45°, and the transmitter emits sound "di", and the
drone light flashes and releases, indicating that the
gyroscope has been calibrated. (drone should be placed
on horizontal ground)
Tips: When the drone doesn’t appear to use the trim correction flight status, or
being hit hard (or falling abnormally). thus cause the difficulties in controlling.
Now frequency making and adjustment are needed again.