①
②
When the propellers get stuck, then activate stuck protection function and the motors
stop running.
Pull down the left stick to the lowest position and then go back to the center, stuck
protection will be released and the drone can fly again.
Stuck Protection
Out of range alarm
When the drone is out of the remote control distance, the transmitter will continues to
sound “didi...didi...didi” to alarm the user to return the drone immediately.
Parts Replacement
Propeller Replacement
Propeller guards assembly instruction
Install:
attach one buckle to the arm and then
push anotherbuckle in until they locks.
Remove:
take it out from buckles on both
sides and pull out the propeller guards.
Alignment
screw hole
There is different A and B remarks on the propeller. Be sure that the propellers are
installed to the correct motors, which remarked the Letters to identify on the motor
holder, if not, then the drone can not work normally.
Remove:
Turn out the screw, hold the propeller
and pull out the propeller upward in the direction
of the vertical motor.
Install:
The center hole of the propeller is aligned
with the motor shaft and pressed down in the
direction perpendicular to the motor. The screw
hole of the propeller corresponds to the screw
hole on the motor shaft. Tighten the screw and
install the propeller cover.
Please make sure the propeller are installed correctly, otherwise the drone cannot fly.
09
