A=A
A
A
B
B=B
B
A
B
1. When the propellers get stuck, then activate stuck protection function and the
motors stop running.
2. Pull down the left stick to the lowest position and then go back to the center,
stuck protection will be released and the drone can fly again.
Stuck Protection
Attention
①
Switching sequence. At first, turn on the power of the drone, then turn on the
power of the transmitter. After the end, turn off the power of the drone first, and
then turn off the power of the transmitter.
Improper operation caused the crash. It is necessary to check and confirm the
connection of the motor
，
propeller or battery of the drone and the damage
degree, so that the drone can fly again. If there is damaged, please replace the
new accessories or prone to accident.
②
There is different A and B remarks on the propeller. Be sure that the propellers are
installed to the correct motors, which remarked the Letters to identify on the motor
holder, if not, then the drone can not work normally.
To remove the propeller,
hold the propeller vertically and then pull the propeller out.
To install the propeller,
mount propeller aim the central shaft of the motor and press
down.
Parts Replacement
Propeller Replacement
11
