Preface
About SunFounder
SunFounder is a technology company focused on Raspberry Pi and Arduino open source
community development. Committed to the promotion of open source culture, we strive to
bring the fun of electronics making to people all around the world and enable everyone to
be a maker. Our products include learning kits, development boards, robots, sensor modules
and development tools. In addition to high quality products, SunFounder also offers video
tutorials to help your own project. If you have interest in open source or making something
cool, welcome to join us! Visit
About This User Manual
This small and ultralight indoor multicopter kit applies
F3_EVO_Brush
as the flight controller, thus
it gives you all the features you need for the heart of your aircraft. Whether you’re into FPV
racing, acrobatic flying or aerial photography, it’s perfect. The flight controller has been
configured and firmware burnt, so you can fly it as soon as the receiver, propellers, and battery
are assembled. It is equipped with a 5.8G transmitter for real-time image transmission, bringing
you an extraordinary visual experience.
Follow the instructions to assemble the aircraft before flying the aircraft. The software
debugging has been configured on the flight controller originally, which is mentioned in
Chapter 3 and Chapter 4. If you want to redo it, you can follow those instructions.
Notes
: This guide fits both the
BEE-100
kit and the
BEE-100S
kit. Most of the steps are the same
for the two aircrafts; for some different practice, just take
BEE-100S
for example.
Free Support
If you have any
TECHNICAL questions
, add a topic under
FORUM
section on our website
and we'll reply as soon as possible.
For
NON-TECH questions
like order and shipment issues, please
send an email to
You're also welcomed to share your projects on FORUM.
SunFounder
