Contact Resistance Tester MRL-11
MEASURE IN ‘MEASURE’ mode:
Select ‘Measure’ option by moving cursor to “Measure’ by key as per figure 3 below:
Fast measure
Measure
Data
Time PC
Figure 3
Press ‘ENTER’ key, test starts and display is as figure ‘4’ below:
100A
1000.0 uOhm
Stop 01 s
Figure 4
‘01 s’ displays in count-up mode to 60 seconds. After 60 s test is complete
and current output is switched off, display as figure 5 below:
100A
1000.0 uOhm
Print Save
60 s
Figure 5
By default cursor is at ‘Print’ and to print results, press ‘ENTER’ key. To save
results, move cursor by key to ‘Save’ and press ‘ENTER’ key.
