manualshive.com logo in svg

Ude GD-36, Manual, Page: 5 / 31

Share
Download
Ude GD-36 Manual Download Page 5

1 

Output level

0dBu (0,8Vrms/600 

Ω) 

Output type

XLR (Balanced: MONO), RCA (L,R: STEREO) 

2 

Message recording

Electret microphone built-in, AGC active, Gain max: x16 

Message list

100 

Program event list (Calendar)

100 

Music track list

150 

Real time clock and calendar battery

Lithium 3V cell 3V CR2025 (No rechargeable type) 

Supported file type

• 

Voice: WAV (PCM/ADPCM/OGG)

• 

Music: MP3.

Audio format (recording)

Codec: Vorbis Ogg, Hi-Fi Voice Profile, Sampling Frequency: 44.1KHz, MONO, 16 bits, 
typical bitrate: 36kbps 

Formato Audio (Reproductor) 

Mp3 Files:
MPEG 1.0 

Sample rate (Hz): 48.000, 44.100, 32.000 Bitrate (kbit/s):

32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320.

MPEG 2.0 

Sample rate (Hz): 24.000, 22.050, 16.000 Bitrate (kbit/s):

32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320.

MPEG 2.5 

Sample rate (Hz): 12.000, 11.025, 8.000 Bitrate (kbit/s):

32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320. 

RIFF WAV Files 

(1 o 2 canales)

Formato 0x01: PCM, 8 o 16 bits, Sample rate <= 48.000Hz.
Formato 0x11: IMA ADPCM, 8 bits, Sample rate <= 48.000Hz 

Orbis OGG Files 

(1 o 2 canales) Block size: between 64 and 4096 bytes.

Quality: 8 y 16 bits.
Sample rate <= 48.000Hz.
Bit rate <= 500 kbit/s 

Max recording time:

SDCARD size limit (typically: 66 hours / 1GB card) 

Message activation

Momentary (pushbutton) o Continuous (Switch)

3 

Activation mode

Contact: N.O. (Normally open) o N.C. (Normally closed) 

Priority hierarchy

Geographical (IN1 > IN2 >…> IN10) or Numeric Priority (independentby any input). 

Screen type

LCD black-type LED backlight (4096 colors, 132 x 132 dots) 

4

Auxiliary  utput

o

Up to 11 N.O. outputs (TL1 a TL10, TM) 

Monitor audio output

Headphones: dim: 3,5 mm, 32 

Ω

, Front panel

Keyboard built-in

Navigation on menus: 5 keys (c OK).
Direct access: 4 functions (MENU, PLAY/PAUSE, STOP, BACK) 

Media connectors

• SDCARD (Messages & BGM): Rear panel.
• USB 2.0 A-Type (BGM): Front panell. 

Media support

• SDHC Card (High Capacity): 4GB o upper, FAT32 formatted.

GD-36 not compatible with microSDHC type cards, or even using a size adaptor.

• USB Flash Memory: 2.0 type, FAT32 formatted.

GD-36

3.- TECHNICAL SPECIFICATIONS

 

 

5 

Remote LAN Connection

Ethernet type, RJ-45 connector (8 pins)
• 10/100 Mbps  (compatible)
• IP Auto (DHCP) or Manual 

 

                                        

1

 Selectable from Menu.

2

 Managed from Menu.

3

 Selectable from Menu, but this option is common for all external input (IN1 a IN10).

4

 Assignable to any message or external input from Menu.
  

5

 Selectable from Menu.

28

5

610.396A

rev.

1

Summary of Contents for GD-36
































Reviews:

No comments