Ude GD-36, Manual, Page: 28 / 31

GD-36
28 27 610.396A
rev.
1
7.5.1 ACTIVATION MODE
In the corresponding drop-down menu, select either Open Contact, " OPEN CONTACT " or Closed Contact,
" CLOSED CONTACT ".
If " OPEN CONTACT " is selected, the message will start playing after opening the corresponding contact that was
previously closed.
If " CLOSED CONACT " is selected, the message will start playing after closing the corresponding contact that was
previously open.
7.5.2 PRIORITY MODE
In the corresponding pull-down menu, select between Geographical " GEOGRAPHICAL ", (the highest priority is IN1
and the lowest priority is IN10), or by numerical value " NUMERICAL ", (priority 1 is the highest and priority 10 is the
lowest).
Parameters must be specified for each of the " REMOTE INPUT " inputs, such as the audio file name " MESSAGE
FILE " and the priority " PRIORITY LEVEL ". It is necessary to specify, at each " INPUT " input, whether the message
playback activation shall be triggered by an edge (" EDGE " or "push-button" type), or by a level change (" LEVEL " or
"Switch" type).
In addition, you can select the output remote controls that will be activated when this message is activated. To select
an output, press on the "
OUT " button of the output to be activated and its corresponding any combination of outputs
can be activated.
Remember that after modifying the parameters that have an associated " SAVE CHANGES " button, this button must
be pressed to make the changes effective in the GD-36.
7.6 CHANGE PASSWORD
This page allows us to change the Password:
To change the password it will be necessary to enter the current password in the " OLD PASSWORD " box (4 numeric
digits), enter the new password in the " NEW PASSWORD " box (4 numeric digits), repeat the new password in the
" REPEAT NEW PASSWORD " box.
Do not forget to press " SAVE PASSWORD " to make the changes effective in the GD-36.
NOTE : Remember that the default password is 1234.