6.4.6. Calendar Events Setup.
GD-36 supports management of up to 100 different programs, based on events related to the calendar. For each program it is
possible to control auxiliary outputs will be activated during playback, when it automatically switched to the message and the
repeat cadence in fractions of 5 minutes.
To program an event, please follow the next steps:
1.
Select the "Calendar" option on the "Adjustment" menu and press
"OK"
to
activate it.
2.
Press " " to select the program number to edit.
3.
Press
"OK"
to enter in the Program number edit mode.
4.
The "[0]0" will appear indicating that the first digit can be changed using the
"
" or "
" keys.
5.
To change to other digits, please use the "
" or "
" keys. To validate the
Program press
"OK".
6.
Press "
" or "
" to select the auxiliary control output line to edit.
7.
During the setup of the Auxiliary Control Outputs, once the edit mode has been activated by pressing
"OK",
should be
use the "
" or "
" keys to move from one output to the next one, and
"OK"
over the desired output. With the "
" or "
“
keys will be selected the desired state and will be fixed with
"OK".
To validate the changes on every line must be press
"OK".
8.
Press "
" to move at next page (2/3).
9.
Press
"OK"
to activate the selection of the Voice or Sound Audio File name
from a list of files.
10.
Press "
" or "
" to select the desired message from the list.
11.
Press
"OK"
to fix the current message (file name).
12.
Press "
" to select the Activation Mode option and
"OK"
to activate the
edit mode.
13.
Press "
" or "
" to select one of the following Calendar modes, and then
press
"OK"
to fix it.
Off Once Daily Weekly MonFri Weekend DirectPlay Days Date to date.
The calendar is used to select the start and end of the event, and the repetition period of the message in units of 5 minutes.
The difference between modes is that calendar day or days are associated with the event, namely:
• Once.
In this mode you specify a particular date.
•
Daily.
Are set every day, ie Monday through Sunday.
•
Weekly.
You select a single day of the week, between
Monday and Sunday.
•
Mon-Fri.
You select a weekday, between Monday and Friday.
•
Weekend.
Saturday and Sunday is selected, and exclude the other days of the week.
•
Days.
In this mode you can choose any combination of days a week. Selected will remain on marked
"X",
and
excluding the days marked with a
"0".
•
DirectPlay.
This mode is special and can associate a program number with a voice file and some auxiliary control
outputs, without specifying an actual event calendar, ie a day and time of activation. This will appear on the list of
programs and can be run from it, so always manual.
•
Date-to-Date.
This mode allows you to specify the message playback between two specific dates (Start Date -
Start time and End Date-End Time) and a repetition rate in fractions of 5 minutes.
GD-36
Calendar 1/3
Program
00
Aux. Control Output
1->X 2->0 3->0 4->0
5->0 6->X 7->0
8->0 9->0 10->X
28
19
610.396A
rev.
1