UD Trucks LKC371, Body Builder'S Book

Page: 157 / 385

3) Connect the harness to the connector on the chassis harness.
(The connector is placed in the chassis harness section on the
inner left side of the cab mounting bracket)
4) The connector to be used is the waterproof 4-pole terminal (6189
0841) with blue tape on the stem. Before using the connector, take
the tape off and detach the waterproof plug.
5) Cautions about attachment
• For brackets and similar parts, use ones provided by the chassis
maker.
• Do not mount the engine control lever in a position where it may be
directly splashed with water. If the sensor section, in particular, may
be directly splashed with water (including times of a car wash), pro-
tect it with a cover.
• Do not disassemble the engine control lever. Be careful not to drop
the engine control unit or to give a strong impact to it. It may cause a
malfunction or break down.
• An extension sub-harness is available as an optional part.
Part number : 24024 37Z04 [Harness length : 137.80 inch (3500
mm)]
• Use the sub-harness connector 6188 0541 (male : chassis harness
side) and 6189 0841 (female : engine control lever side), manufac-
tured by Sumitomo.
C25