- 39 -
Press and hold the
SET
key for three seconds. The first alarm
parameter will begin flashing (alarm hour).
To save the alarm setting and proceed to the next alarm
parameter, Press (do not hold) the
SET
key.
To adjust the alarm parameter, press the
C
key or
MAX/MIN/-
key to increase or decrease the alarm settings, or
press and hold the
C
key or
MAX/MIN/-
key for
three seconds to increase or decrease the alarm settings
rapidly.
Press the
ALARM
key to turn on (the alarm icon will appear )
and off the alarm.
Press the
SNOOZE
key twice at any time to return to the
normal mode. After 30 seconds of inactivity, the alarm mode
will time out and return to normal mode.
Summary of Contents for FT0365
