Doc. _____ - Rev. __/__/____
USER MANUAL
EN
Drw. / Dis. ....____
19/45
MANUALE D’ISTRUZIONI
IT
Insert the connector “1” into the proper space on
the actuator and make sure it is locked.
To carry out the main connection, use a
5-pole cable “2”; for the connection between
two actuators, use a 5-pole cable “3” (see
the picture below).
WARNING
In order to remove the connector, DO NOT PULL
THE CABLE; release the special wings by using two
screwdrivers.
Insert the supplied rubber plug “4” into the
actuator end which is not used.
8.2.5 Cable connection
....
PUSH
2
3
4
1
Summary of Contents for NANO DC
Page 2: ......
