Doc. _____ - Rev. __/__/____
USER MANUAL
EN
Drw. / Dis. ....____
9/45
MANUALE D’ISTRUZIONI
IT
4. DATA PLATE
....
The manufacturer’s identification and European
Directive conformity plate is located on the
actuator.
Several safety warnings are applied to the actuator;
such warnings must be strictly followed by
everyone dealing with this product.
The company is not to be held responsible for
damage to property or accidents to people which
might occur if the above-mentioned warnings are
not observed. In such a case, the operator is the
only person responsible.
The identification plate CE/EAC is located on the
right side of the actuator.
Manufacturer’s identification
Identificazione costruttore
CE/EAC marking
Marcatura CE/EAC
Model/
Modello
Electrical features
Caratteristiche elettriche
Part Number
N° parte
Serial Number
N° di serie
ULTRAFLEX CONTROL SYSTEM S.r.l. - Made in Italy
NANO DC
24 Vdc 1A IP40
400 N (spinta-push) 400 N (tiro-pull)
Corsa - Stroke 400 mm
PN: 000000
SN: 0000000000000
IP protection
Protezione IP
Mechanical features
Caratteristiche meccaniche
5 PRODUCT DESCRIPTION
....
The products described in this manual are chain
actuators designed for applications on side hung
and parallel windows, rooflights and bottom hung
windows. The actuator has not been designed for
continuous operation. Pay attention to the duty
cycle value shown in the main features (par. 6).
• NANO DC is provided with 1.5 m cable without
selectable features (Synchronization, feedback
signal and speed selection). The quiet operation
is ensured by the slow speed (4 mm/s) for natural
ventilation.
NANO DC actuators with maximum speed are available
as standard; quite operation is available on request.
• Suitable for combined installation with the
additional locking device E-LOCK.
The actuator is intended for the electromotive
opening and closing of windows. It is suitable for
indoor use, only.
Opening takes 60 seconds; the actuator speed is
proportional to stroke.
Summary of Contents for NANO DC
Page 2: ......
