Installation
Mounting Control Unit on Goggle Strap
•
Use the Goggle Attachment Clip to install the control unit on to
goggle strap.
•
Fold Goggle Attachment Clip around of the goggle strap on the
left side of the helmet. Use the Velcro to ensure a secure hold on
the goggle strap.
Mounting Control Unit using the Side Mounted Helmet Strap.
•
Install Side Mounted Helmet Strap on left side of helmet .
•
Wrap Side Mounted Helmet Strap around the 2 straps on the
helmet.
•
Make sure that the Side Mounted Helmet Strap is installed with
2 side holes at the top of the clip are at the top and the metal
prong on the clip is point down.
•
Use the Velcro to secure Side Mounted Helmet Strap in Place.
Mobile Phone Operations
Voice Call
•
To activate the voice call feature, hold the
Down
and
Answer
buttons for 2 seconds. The accuracy of the voice dialing
,
feature is dependent on your mobile phone s capabilities.
Last Number Redial
•
To redial the last number, hold the
Up
and
Answer
buttons
for 2 seconds. The capability of this function is dependent on
the mobile phone used.
3 way calling
•
While on a call, if an incoming call comes in, you may answer
the call by pressing the
Answer
button once.
•
To swap between 2 concurrent calls, press the
Answer
button
once.
•
To end a call during a 3 way call, holding the
Answer
button
for 2 seconds will end the active call. Upon terminating
the active call, the call on hold will become active.
Music Feature
•
If the mobile phone supports A2DP/AVRCP profile, user may
activate the music by playing it directly from the phone or by
controlling the phone via the helmet. To operate refer to
Install Metal Mounting Bracket
•
Identify a position on the helmet to adhere the Metal Mounting
Bracket.
12
Music Streaming Operations section. Should the documented
steps fail to activate A2DP/ACRCP profiles, please refer to the
user manual of your pairing device (e. g. phone, ipod, etc...).
17
