Installation
The
HBC120 helmet communicator package
contains :
A HBC
120 helmet
communicator control unit
A pair of
hi-fi stereo headset
with embedded
microphones
18”extension Cord
A
metal mounting bracket
with double sided tape
Side Mounted Helmet Strap
Goggle Attachment Clip Strap
Microphone Alignment
Inserts
An
AC charger
and
USB
charging cable
A
user manual
10
Intercom Operations
To use the intercom profile on the helmet communicator
for the first time, you need to first connect the two
helmet communicators wirelessly by pairing.
Pairing
•
Pairing readies one
helmet communicator to search
for the other
helmet communicator. This pairing
process needs to be carried out only once.
•
With both
helmet communicators powered off, hold
the
Answer
and
Down
button for 5 seconds to pair helmet 1
(master unit) and hold
Answer
and
Up
buttons for 5 seconds
to pair helmet 2 (secondary unit). The status indicator for
both helmets will blink blue and red alternately while trying to
connect to each other.
•
During the pairing process, please ensure that there are no
other intercom units in close proximity.
•
It is recommended that after the pairing process is successful.
Restart both
helmet communicators.
After pairing the two
helmet communicators,
you may now use the intercom profile.
Initiate Intercom (Toggle function)
•
To start conversation, hold the
Up
button for 2 seconds.
•
In the
event where the link breaks during the conversation,
you will need to re-initiate it when the helmets come back
into
Bluetooth
range.
T erminate Intercom (Toggle function)
•
To end the conversation, hold the Up button for 2 seconds.
* Note: Pairing between 2 units only needs to be done one time.
After the initial pairing, initiate or terminate a conversation by
pressing the Up button for 2 seconds.
19
