Please, turn off the Swift K��A
and disconnect the AC power
cord from the AC adapter inlet
or the wall socket immediately
and contact UCLSWIFT Co., Ltd.
If any of following incidents
occurs while operating.
· Fumes, odor, noise or over-
heating.
· Liquid or foreign substances
fall into the device.
· The splicer is dropped or
damaged.
Use the supplied power cord with
the Swift K��A only. Using an
improper AC power cord may
cause fire, electric shock or
personal injury.
DO NOT touch the electrode
when the Swift K��A is on. The
high voltage and temperature
generated by electrode may
cause electric shock or burn.
��
OPERATION
Make sure the voltage and frequency and connect
the DC cord of the AC/DC adapter to the DC jack of the
battery. The LED turns to green when the charging is
completed. The battery includes the protection circuit
that prevents full discharge and full charge. The supply of
power stops once the protection circuit is activated.
In order to deactivate the protection circuit and resume
feeding power, wait about �� seconds and connect again
the DC cord to the DC jack.
Swift K��A can be charged during operation because
the floating charging method is applied. The battery
can be also charged with ��V Cigar jack charger.
AC Cord
AC/DC Adapter
DC Cord
DC Jack
