7
4. Disassembling
For parts replacement or maintenance
[Removal method of the top cover]
: To clean the spray nozzle, inside of the water reservoir, the float switches,
surface of the oscillators and the outside of the grass tube of the UV lamp.
*the top cover is fixed with the face nut.
Procedure
1)
Loosen a face nut about twice.
2)
Hold the spray nozzle with both
hands, then lift up the right side of
the top cover.
3)
Pull out the top cover toward the
upper-right side.
*Condensation formed on the nozzles.
Please take care not to spill it.
CAUTION
●Turn off the power supply and shut the water supply in advance.
●Drain the inside water in the water reservoir before maintenance.
●When the power supply switch is off, it drains automatically.
●Remove the top cover before disassembling, there is a risk of crack.
②
③
R
Top cover
Top cover
Face nut
(to fix the top cover)
Face nut
R
①
Loosen it twice