SARA-N2 / N3 series - System integration manual
UBX-17005143 - R13
Approvals
Page 85 of 95
C1-Public
⚠
The gain of the system antenna(s) used for SARA-N310 modules (i.e. the combined transmission
line, connector, cable losses and radiating element gain) must not exceed the values stated in the
Declaration of Conformity of the modules, for mobile and fixed or mobile operating configurations:
o
8.59 dBi in 700 MHz, i.e. LTE FDD-28 band
o
9.23 dBi in 800 MHz, i.e. LTE FDD-20 band
o
9.46 dBi in 900 MHz, i.e. LTE FDD-8 band
o
12.35 dBi in 1800 MHz, i.e. LTE FDD-3 band
The conformity assessment procedure for SARA-N200 and SARA-N210 modules, referred to in Article
17 and detailed in Annex II of Directive 2014/53/EU, has been followed.
Thus, the following marking is included in the product:
The conformity assessment procedure for SARA-N211 and SARA-N310 modules, referred to in Article
17 and detailed in Annex II of Directive 2014/53/EU, has been followed. According to the ATEX Directive
2014/34/EU, Article 13, Paragraph 1-3, the CE mark is not affixed to the product label.
The following marking is included in the product:
1304
4.3
ATEX / IECEx conformance
SARA-N211 and SARA-N310 modules are certified as components intended for use in potentially
explosive atmospheres compliant to the following standards:
•
IEC 60079-0
•
IEC 60079-11
•
IEC 60079-26
The certification numbers of the modules, according to ATEX directive 2014/34/EU, are:
•
SIQ 18 ATEX 104 U for SARA-N211 modules
•
SIQ 19 ATEX 305 U for SARA-N310 modules
The certification numbers of the modules, according to IECEx conformity assessment system, are:
•
IECEx SIQ 18.0004U
for SARA-N211 modules
•
IECEx SIQ 19.0008U
for SARA-N310 modules
According to the standards listed above, the modules are certified with the following marking:
•
II 1G Ex ia IIC
for SARA-N211 modules
•
II 1G Ex ia IIC Ga
for SARA-N310 modules
The temperature range of the
modules is defined in the “Operating temperature range”
section of the
and the SARA-N3 series data sheet
The modules are suitable for temperature class T4 applications, as long as the maximum input power
•
does not exceed 2.0 W
on SARA-N211 modules
•
does not exceed 1.85 W on SARA-N310 modules
The RF radiating profile of the modules is compliant to all the applicable 3GPP / ETSI standards, with
250 mW maximum RF average power according to LTE Cat NB1/NB2 Power Class stated in
The nameplate of the
modules is described in the “Product labeling” section of the SARA
-N2 series
and the SARA-N3 series data sheet