SARA-U2 series EVK - User Guide
UBX-14001743 - R05
Appendix
Page 15 of 21
B.2
How to install and configure a high data rate modem connection
This example describes how to install and configure a high data rate packet data connection on a PC with the
Windows 7 operating system, using the TCP/IP stack of the PC, over the native USB interface of the cellular
module connected to the Windows PC by the
Cellular Native USB
connector (J313 on ADP).
1.
Follow the board setup instructions in section 1.8 to provide the required connections with EVK-U2x.
2.
Select: “Control Panel > Network and
Internet > Network and Sharing Center
> Setup a new connection or network”
This opens the “Choose a connection
option” Wizard.
3.
Select
Set up a dial-up connection
.
Click on
Next
.
