Ublox EVK-ODIN-W2, User Manual

Page: 5 / 22

EVK-ODIN-W2 - User guide
UBX-16007132 - R07 Contents Page 5 of 22
1.2 Kit includes
 EVK-ODIN-W2 evaluation board

USB cable
 Quick Start card
1.3 Jumper description
Function Description Name Default
Onboard debugger
power Selects whether to power the onboard debugger or not J6 Mounted
Virtual COM port
UART selection Selects UART1 or UART3 for virtual COM port over USB J13 UART1
A1 and A2 Analog
in or Digital I/O
selection Selects whether the A1 and A2 socket pins on J2 connector can
be used for analog in or Digital I/O. J26 Digital I/O
32.768kHz LPO
oscillator Selects whether the 32.768 kHz LPO oscillator is connected to
ODIN-W2 or not J21 Not mounted
ODIN-W2 Boot Selects whether to force ODIN-W2 into Boot mode or not J15 Not mounted
Table 1: EVK-ODIN-W2 jumper description
1.4 LEDs
Function Description Name Color
RGB/SPA status
RGB LED shows status for u-connectXpress. Also available for
user applications in ARM Mbed.
See the ODIN-W2 series data sheet [4]
.
DS1 RGB
Onboard
debugger/virtual
COM port status Indicates status for the onboard debugger and virtual COM port
over USB DS6 Green or Red
Table 2: EVK-ODIN-W2 LEDs description