Ublox EVK-ODIN-W2, User Manual

Page: 4 / 22

EVK-ODIN-W2 - User guide
UBX-16007132 - R07 Contents Page 4 of 22
1 Product description
1.1 Overview
The ODIN-W2 is a compact and powerful stand-alone multiradio module, designed for
Internet-of-Things gateway applications. The module includes embedded Bluetooth
® stack, Wi-Fi
driver, IP stack, and an application for wireless data transfer, all configurable using AT commands.
The wireless support includes dual-mode Bluetooth v4.0 (BR/EDR and low energy) and dual-band
Wi-Fi (2.4 and 5 GHz bands).
This document describes how to set up the EVK-ODIN-W2 evaluation kit and provides information for
evaluating and testing the u-blox ODIN-W2 multiradio standalone module with u-connectXpress
software or using the Arm
® Mbed™ development tool. The main features of the EVK-ODIN-W2 are:
 RJ45 Ethernet connector for ODIN-W2 RMII-PHY interface
 Can be powered through USB or external power supply
 Onboard ST-Link v2.1 debugger
 32.768 kHz LPO oscillator

Pin headers in 1.8 V I/O domain and Arduino sockets in 3.3 V I/O domain
 Micro SD-card slot
The EVK-ODIN-W2 evaluation kit is available in the following two different versions depending on the
ODIN-W2 series module that is mounted:
 EVK-ODIN-W260

EVK-ODIN-W262
This section describes the main connectors and settings required to get started. Figure 1 shows the
EVK-ODIN-W2 evaluation board.
Figure 1: EVK-ODIN-W2 Evaluation kit overview