EVK-ODIN-W2 - User guide
UBX-16007132 - R07
Appendix
Page 14 of 22
Appendix
Updating the ST-link software
Due to an incompatibility between the ST-link software in the debug chip and Windows 10, the EVKs
produced before December 01, 2016 will not work with Windows 10. Connecting them to a PC running
Windows 10 will corrupt the bootloader of ODIN-W2 and the EVK will stop working. Also, the latest
EVKs might have issues with flashing if the USB mass storage device driver is not up to date.
A.1
Repairing an older board already connected to a Windows 10
PC
To fix this issue, the bootloader of ODIN-W2 must be reflashed. To reflash the bootloader, follow step
1 mentioned in section 2.3.2.
A.2
Updating the ST-link firmware of the debug chip
To update the ST-link firmware, do the following:
1.
Download the following application from ST
⚠
Note that the drivers are bundled with the ST-LinkUpgrade file so the latest file can be
downloaded.
2.
Run the executable
ST-LinkUpgrade.exe
.
3.
Press Device Connect as shown in the screenshot below and the current Firmware version will
be shown. The firmware should be upgraded to the version - V2.J32.M22 at least as shown in
the screenshot below.
4.
Click Yes and wait for the update to complete.
A.2.1
Upgrading the USB mass storage device driver
Make sure that the computer has the latest USB mass storage device driver (10.0.17134.1 or later).
If it is not possible to upgrade the driver to the correct version, disable the driver to avoid this issue.
Summary of Contents for EVK-ODIN-W2
Page 16: ...EVK ODIN W2 User guide UBX 16007132 R07 Appendix Page 16 of 22...
Page 17: ...EVK ODIN W2 User guide UBX 16007132 R07 Appendix Page 17 of 22...
Page 18: ...EVK ODIN W2 User guide UBX 16007132 R07 Appendix Page 18 of 22...
Page 19: ...EVK ODIN W2 User guide UBX 16007132 R07 Appendix Page 19 of 22...
